Camera & Sensor Compatibility — Technical Specification Reference
Purpose & Scope
This page defines the camera and sensor compatibility framework applicable to explosion-proof camera systems maintained and referenced by Explosion Proof Camera (ExPC).
Compatibility governs which imaging devices, sensors, and optical components may be integrated within certified explosion-proof camera enclosures without exceeding approved technical, mechanical, or certification limits.
All compatibility references apply exclusively to documented, certified configurations and do not imply universal interoperability.
Governing Compatibility Principles
Camera and sensor compatibility within ExPC systems is governed by:
Certified enclosure dimensions
Mechanical mounting interfaces
Thermal dissipation limits
Power and signal constraints
Optical alignment and field-of-view requirements
Compatibility is deterministic, not adaptive.
Only configurations explicitly documented within the product’s technical scope are considered valid.
Camera Module Compatibility
Fixed Cameras
Fixed camera modules are compatible where:
Physical dimensions fall within enclosure limits
Power consumption remains within certified thresholds
Optical alignment meets documented field-of-view constraints
Resolution, codec, and network protocol do not override mechanical or thermal constraints.
PTZ Cameras
Pan-Tilt-Zoom (PTZ) compatibility is governed by:
Internal clearance and movement envelope
Mechanical load limits
Motor power and heat generation
Cable routing and strain management
PTZ functionality must remain fully contained within certified enclosure boundaries under all operating conditions.
Sensor Compatibility
Optical Sensors
Optical sensor compatibility is determined by:
Sensor size and mounting geometry
Heat generation profile
Lens interface compatibility
Sensor upgrades or substitutions are not permitted unless explicitly documented.
Lens & Optical Interface Constraints
Lens compatibility is governed by:
Physical length and diameter
Optical window alignment
Field-of-view constraints
Focus and zoom clearance
Lens selection does not modify enclosure certification scope.
Compatibility Boundaries
Compatibility does not extend to:
Arbitrary third-party camera modules
Field-modified enclosures
Uncertified adapters or spacers
Custom wiring beyond documented configurations
Any deviation invalidates compatibility assumptions and may compromise certification.
Certification Relationship
Camera and sensor compatibility operates within certification scope.
Compatibility does not:
Expand hazardous area approval
Modify temperature class
Alter ingress or impact ratings
Replace certification documentation
Certification scope remains the governing authority.
Relationship to Other Specification References
Camera and sensor compatibility interfaces with:
Each reference category is maintained independently to preserve clarity, auditability, and traceability.
Authority Statement
Explosion Proof Camera (ExPC) maintains and verifies all documented camera and sensor compatibility references as part of its technical authority and information governance framework.
All compatibility information reflects current, active product configurations and is reviewed to ensure alignment with applicable hazardous area standards and certification constraints.
